PVC Fills
Stronglite offers a wide range of edge folded PVC fill products to meet specific applications. Our standard fill products meet the requirements used in counterflow cooling towers. Our fills are with both edges folded and achieve high surface area for given volume.
Stronglite PVC Fills are made by continuous forming and offer minimum resistance to airflow, providing more cooling by lower power consumption. They have uniform thickness throughout.
Durable folded edges provide strength at critical locations on the fill. The fills are easy to glue at site thus saving on transportation costs.
Characteristics Units
12 mm
19 mm
27 mm
Cooling Towers Application Counterflow
Counterflow
Counterflow
Flute height mm
12
19
27
Longitudinal pitch mm
38
50
70
Spiral angle °(degree)
28
28
28
Surface area per unit volume m²/m³
243
157
120
Maximum continuous
Operating temp.
°C
°F
55
131
55
131
55
131
Standard Fill Sheet Finished Thickness mm
0.3
.3
0.3
- Continous Forming.
- Double Edge Folding.
- Uniform Thickness.
- Available in sheet width of 300mm & 600mm.
- Uniform Thickness : Uniform thickness provides long retention time & also provides uniform time for heat transfer.
- Continous Forming : Continous forming process is adopted by us where one end of fill is always free & material supply from other end is always available during the time of formation. Additional requirement of raw material is met hence no thinning effect takes place at crests & troughs.
- Double Edge Folding : OUR manufacturing technique has the ability to fold the edges of the sheets providing stronger edges, which gives extra protection against rough handling during installation & maintenance. It also protects the fill from erosion.
- Longer Length : Longer length allows the water to be inside the fill media for maximum time. It also facilitates to decrease the number of support beam thus inturn reduces the pressure drop & also reduces the cost of construction
Other Products
Latest Products